G. RAU
The "G. RAU" trademark, serial number 85688565 , was filed on 27th of July 2012 with a mark drawing code of 4000 and its transaction date is 85688565. The attorney assigned is Michael J. Striker, attorney docket number 5271. Since 7th of August 2012, the document can be found in the law office in the publication and issue section. The status of the trademark was checked last on 08/06/2012.
The "G. RAU" trademark, serial number 85692434 , was filed on 1st of August 2012 with a mark drawing code of 3000 and its transaction date is 85692434. The attorney assigned is Michael J. Striker, attorney docket number 5270. Since 13th of January 2014, the document can be found in the N10 law office in the publication and issue section. The date when we last checked the status of this trademark was 08/28/2013.
The corresponded responsible for this trademark is MICHAEL J. STRIKER, located at STRIKER, STRIKER & STENBY, 103 E NECK RD, HUNTINGTON, NY 11743-1567.The state or country where the trademark was organized is by G. Rau Gmbh & Co. Kg. The legal entity type behing it is a Limited Partnership, located at Kaiser-friedrich-strasse 7, Pforzheim, zip D-75172.
GOODS AND/OR SERVICES | |
International Class - 006 - Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; nonelectric cables and wires of common metal; ironmongery, small items of metal hardware; pipes and tubes of metal; safes; goods of common metal not included in other classes; ores. | |
---|---|
U.S. Class | 050 - Merchandise Not Otherwise Classified |
Class Status | 6 - Active |
Status Date | 08/09/2012 |
First Use Date | 12/31/2006 |
First Use in Commerce Date | 12/31/2006 |
Primary Code | 006 |
International Class - 009 - Scientific, nautical, surveying, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus and instruments for conducting, switching, transforming, accumulating, regulating or controlling electricity; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire extinguishing apparatus. | |
U.S. Class | 038 - Prints and Publications |
Class Status | 6 - Active |
Status Date | 08/09/2012 |
First Use Date | 12/31/2006 |
First Use in Commerce Date | 12/31/2006 |
Primary Code | 009 |
International Class - 010 - Surgical, medical, dental, and veterinary apparatus and instruments, artificial limbs, eyes, and teeth; orthopedic articles; suture materials. | |
U.S. Class | 044 - Dental, Medical, and Surgical Appliances |
Class Status | 6 - Active |
Status Date | 08/09/2012 |
First Use Date | 12/31/2006 |
First Use in Commerce Date | 12/31/2006 |
Primary Code | 010 |
International Class - 014 - Precious metals and their alloys and goods in precious metals or coated therewith, not included in other classes; jewelry, precious stones; horological and chronometric instruments. | |
U.S. Class | 050 - Merchandise Not Otherwise Classified |
Class Status | 6 - Active |
Status Date | 08/09/2012 |
First Use Date | 12/31/2006 |
First Use in Commerce Date | 12/31/2006 |
Primary Code | 014 |
Goods codes | |
CC0000 | Color is not claimed as a feature of the mark. |
DM0000 | The mark consists of the designation "G. RAU" within a black rectangle. |
GS0061 | Common metal alloys for further manufacturing of the following: metallic pipes and tubes, Bourdon tubes, tubes of plated materials coated with common metals, profile tubes of common metals and their alloys, coated materials and stainless steel tubes of expansion alloys, tubes at meltdown alloys for glass/metal or glass/ceramic/metal compounds and of iron/nickel alloys and resistance alloys, hollow wave guides, thin-wall tubes of common metals and hardenable copper/beryllium alloys, refined tubes of common metals, stainless steel and special materials capillary tubes, metallic assemblies, nickel and nickel alloys and steel beam straps, wires, tubes and profile sections, thermostatic bimetals of iron/nickel alloys, stainless steel and special materials being straps and strips, roll seam welded straps and profile sections, electroplated straps with nickel and tin, silver, gold, copper, zinc, palladium, transportable buildings of metal, non-electric cables and wires of common metal, goods of common metal, namely, metallic pipes and tubes, Bourdon tubes, tubes of plated materials coated with common metals, profile tubes of common metals and their alloys, coated materials and stainless steel tubes of expansion alloys, tubes as meltdown alloys for glass/metal or metal/ceramic/metal compounds and if iron/nickel alloys and resistance alloys, hollow wave guides, thin-wall tubes of common metals and hard enable copper/beryllium alloys, refined tubes of common metal, capillary tubes, laminar composite materials and fiber composite materials, thermostatic bimetal straps and strips, stamp and molded parts of thermostatic bimetal, nickel and nickel alloys and steel being straps wires tubes and profile sections, thermostatic bimetals of iron/nickel alloys, stainless steel and special materials consisting of straps and strips, roll seam welded straps and profile sections, electroplated straps with nickel and tin, silver, gold, copper, zinc, palladium and chemically nickel plated deep drawn and extruded high precision parts and special shapes of metallic materials, all of the above for use in industrial production; refined tubes of precious metals and special materials, pipes, wires, Bourdon tubes, profile tubes, tubes of coated materials, of special alloys and thin-wall refined and capillary tubes, tubes of super elastic materials all for medical purposes for the further manufacturing of the following: stents, catheters, cannulae, guidewires, capillary drainage tubes, capillary reagent tubes, injection syringes, injection needles, hypodermic syringes, hypodermic needles, disposable syringes, syringes intravenous needles, intravenous feeding tubes, capillary tubes for blood, capillary tubes for samples, drainage tubes, drainage appliances, endoscopic equipment, endotracheal tubes, endobrachael tubes, gastroscopes, tracheostomy tubes, uterine syringes, wound draining apparatus |
GS0091 | Electrical controllers; hollow wave guides for applications in high frequency engineering of the following: copper and copper alloys, precious metals and precious metal coatings, thin-wall tubes of common metals and hardenable copper/beryllium alloys, e.g. for further processing into corrugated tubes and measuring springs subjected to high dynamic stresses, refined tubes of common metals, precious metal, stainless steels and special materials, e.g. as guide tubes for test pins or plug-in connections, capillary tubes for measuring and control engineering, hydraulics and pneumatics of copper, copper alloys, stainless steel and special alloys, thermostatic bimetal snap washers, thermostatic straps and strips, stamped and moulded parts of thermostatic bimetal, contact parts, solid and coated, contact rivets, solid and coated, stamped flexible parts of materials coated with precious metals, contact springs, contact part assemblies, copper and copper alloys, nickel and nickel alloys, stainless steels and materials with special physical properties with regard to expansion behavior and magnetism, including with electroplated surface coats, cold extruded parts as heat sinks, load-bearing and connecting elements for power electronics, contact parts and contact laminations for collectors, load-bearing plates and contacting plates, composite electrodes for spark plugs, protective sleeves, screening cans, caps and a number of small high-precision deep-drawn parts in special shapes of metallic materials, semi-finished products and memory elements of shape memory alloys for measuring and control engineering, coated materials with precious metal coatings and substrates of copper material, nickel and nickel alloys and steel, as straps, wires, tubes, and profile sections, contact bimetals and coatings of precious metal and substrates of conductive copper materials and all coatable nickel materials and steels, roll seam welded straps and profile sections, electroplated straps with nickel, tin and precious metals, contact parts and assemblies with inserts and coatings of precious metal and precious metal alloys, welded, soldered riveted, if required with electroplated coatings, contact rivets of precious metal, solid and coated, composite materials for electrical contacts as fibre and laminar composite materials, tubes as Bourdon tubes, profile tubes, tubes of coated materials, of special alloys and thin-wall, refined and capillary tubes, deep-drawn and extruded high-precision parts in special shapes of metallic materials |
GS0101 | Sutcher materials; semi-finished products and memory elements of shape-memory alloys and nickel/titanium for medical purposes for the further manufacturing of the following - trusses; joint implants; splints, drilling jigs, implants, guidewires |
GS0141 | Precious metals and their alloys and goods in precious metals or coated therewith, namely, processed or semi-processed precious metals |
TRADEMARK DESIGN SPECIFICATION:
26.11.21 - Rectangles that are completely or partially shaded
PROSECUTION HISTORY | ||||
Date | Description | Type | Code | |
---|---|---|---|---|
08/28/2013 | NOTIFICATION OF PRIORITY ACTION E-MAILED | O - Outgoing Correspondence | GPRN | |
08/28/2013 | PRIORITY ACTION E-MAILED | O - Outgoing Correspondence | GPRA - PRIORITY ACTION E-MAILED | |
08/28/2013 | PRIORITY ACTION WRITTEN | R - Renewal | CPRA - PRIORITY ACTION WRITTEN | |
08/02/2013 | AMENDMENT FROM APPLICANT ENTERED | I - Incoming Correspondence | ACEC - AMENDMENT FROM APPLICANT ENTERED | |
08/02/2013 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
07/30/2013 | ASSIGNED TO LIE | A - Allowance for Publication | ALIE - ASSIGNED TO LIE | |
07/22/2013 | FAX RECEIVED | I - Incoming Correspondence | FAXX - FAX RECEIVED | |
06/27/2013 | NOTIFICATION OF NON-FINAL ACTION E-MAILED | O - Outgoing Correspondence | GNRN | |
06/27/2013 | NON-FINAL ACTION E-MAILED | O - Outgoing Correspondence | GNRT - NON-FINAL ACTION E-MAILED | |
06/27/2013 | NON-FINAL ACTION WRITTEN | R - Renewal | CNRT - NON-FINAL ACTION WRITTEN | |
05/29/2013 | AMENDMENT FROM APPLICANT ENTERED | I - Incoming Correspondence | ACEC - AMENDMENT FROM APPLICANT ENTERED | |
05/29/2013 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
05/21/2013 | ASSIGNED TO LIE | A - Allowance for Publication | ALIE - ASSIGNED TO LIE | |
05/17/2013 | PAPER RECEIVED | I - Incoming Correspondence | MAIL - PAPER RECEIVED | |
12/05/2012 | NOTIFICATION OF NON-FINAL ACTION E-MAILED | O - Outgoing Correspondence | GNRN | |
12/05/2012 | NON-FINAL ACTION E-MAILED | F - First Action | GNRT - NON-FINAL ACTION E-MAILED | |
12/05/2012 | NON-FINAL ACTION WRITTEN | R - Renewal | CNRT - NON-FINAL ACTION WRITTEN | |
11/26/2012 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER | |
08/10/2012 | NOTICE OF DESIGN SEARCH CODE MAILED | O - Outgoing Correspondence | MDSC | |
08/09/2012 | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM | I - Incoming Correspondence | NWOS | |
08/04/2012 | NEW APPLICATION ENTERED IN TRAM | I - Incoming Correspondence | NWAP - NEW APPLICATION ENTERED IN TRAM |
Information gathered on 12/31/2009. No claim is made regarding the current trademark status. This page is not to be used as legal documentation. Always consult a licensed attorney.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the trademark's owners.