The "LEITZ" trademark, serial number 79019450 ,
was filed on 25th of October 2005 with a mark drawing code of 3000 and its transaction date is 79019450.
The attorney assigned is William J. Sauers, attorney docket number 037192.13701.
Since 23rd of March 2012,
the document can be found in the L70 law office in the publication and issue section.
The employee responsible is JACKSON, STEVEN W and the date it was published for opposition on 05/01/2012.
The date when we last checked the status of this trademark was 03/05/2012.
The corresponded responsible for this trademark is William J. Sauers, located at Crowell & Moring LLP, P.O. Box 14300, Washington DC 20044-4300.
The state or country where the trademark was organized is by Leica Microsystems Holdings Gmbh. The legal entity type behing it is a Corporation, located at Ernst-leitz-strasse 17-37, 35578 Wetzlar, zip .
Date | Description | Type | Code |
06/16/2007 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
06/16/2007 |
ASSIGNED TO LIE |
A - Allowance for Publication |
ALIE - ASSIGNED TO LIE |
06/07/2007 |
INTERNATIONAL REGISTRATION RENEWED |
P |
RNWL - INTERNATIONAL REGISTRATION RENEWED |
12/14/2006 |
LETTER OF SUSPENSION MAILED |
S |
CNSL - LETTER OF SUSPENSION MAILED |
03/23/2012 |
DATA MODIFICATION COMPLETED |
I - Incoming Correspondence |
DMCC - DATA MODIFICATION COMPLETED |
03/05/2012 |
TEAS/EMAIL CORRESPONDENCE ENTERED |
I - Incoming Correspondence |
TEME - TEAS/EMAIL CORRESPONDENCE ENTERED |
03/05/2012 |
CORRESPONDENCE RECEIVED IN LAW OFFICE |
I - Incoming Correspondence |
CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE |
03/05/2012 |
TEAS RESPONSE TO OFFICE ACTION RECEIVED |
I - Incoming Correspondence |
TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED |
09/06/2011 |
DATA MODIFICATION COMPLETED |
I - Incoming Correspondence |
DMCC - DATA MODIFICATION COMPLETED |
09/06/2011 |
NON-FINAL ACTION MAILED |
O - Outgoing Correspondence |
CNRT - NON-FINAL ACTION MAILED |
09/06/2011 |
NON-FINAL ACTION WRITTEN |
R - Renewal |
CNRT - NON-FINAL ACTION WRITTEN |
08/29/2011 |
LIE CHECKED SUSP - TO ATTY FOR ACTION |
S |
RCCK - LIE CHECKED SUSP - TO ATTY FOR ACTION |
01/10/2011 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
07/02/2010 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
12/30/2009 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
04/27/2006 |
NON-FINAL ACTION WRITTEN |
R - Renewal |
CNRT - NON-FINAL ACTION WRITTEN |
10/02/2009 |
CHANGE OF NAME/ADDRESS REC'D FROM IB |
M |
ADCH - CHANGE OF ADDRESS RECEIVED FROM IB |
06/30/2009 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
12/30/2008 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
06/30/2008 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
06/30/2008 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
12/20/2007 |
REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
S |
RCSC - REPORT COMPLETED SUSPENSION CHECK CASE STILL SUSPENDED |
07/12/2007 |
NOTIFICATION OF POSSIBLE OPPOSITION - PROCESSED BY IB |
P |
OPNX - NOTIFICATION OF POSSIBLE OPPOSITION - PROCESSED BY IB |
06/28/2007 |
NOTIFICATION OF POSSIBLE OPPOSITION SENT TO IB |
P |
OPNS - NOTIFICATION OF POSSIBLE OPPOSITION SENT TO IB |
06/28/2007 |
NOTIFICATION OF POSSIBLE OPPOSITION CREATED, TO BE SENT TO IB |
P |
OPNR - NOTIFICATION OF POSSIBLE OPPOSITION CREATED, TO BE SENT TO IB |
12/14/2006 |
SUSPENSION LETTER WRITTEN |
R - Renewal |
CNSL - SUSPENSION LETTER WRITTEN |
11/16/2006 |
TEAS/EMAIL CORRESPONDENCE ENTERED |
I - Incoming Correspondence |
TEME - TEAS/EMAIL CORRESPONDENCE ENTERED |
11/10/2006 |
CORRESPONDENCE RECEIVED IN LAW OFFICE |
I - Incoming Correspondence |
CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE |
11/10/2006 |
TEAS RESPONSE TO OFFICE ACTION RECEIVED |
I - Incoming Correspondence |
TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED |
11/09/2006 |
AMENDMENT FROM APPLICANT ENTERED |
I - Incoming Correspondence |
ACEC - AMENDMENT FROM APPLICANT ENTERED |
10/30/2006 |
CORRESPONDENCE RECEIVED IN LAW OFFICE |
I - Incoming Correspondence |
CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE |
10/30/2006 |
PAPER RECEIVED |
I - Incoming Correspondence |
MAIL - PAPER RECEIVED |
05/18/2006 |
REFUSAL PROCESSED BY IB |
P |
RFNT - REFUSAL PROCESSED BY IB |
04/28/2006 |
NON-FINAL ACTION MAILED - REFUSAL SENT TO IB |
P |
RFCS - REFUSAL SENT TO IB |
04/28/2006 |
REFUSAL PROCESSED BY MPU |
P |
RFRR |
04/28/2006 |
NON-FINAL ACTION (IB REFUSAL) PREPARED FOR REVIEW |
E |
RFCR - NON-FINAL ACTION (IB REFUSAL) PREPARED FOR REVIEW |
04/27/2006 |
ASSIGNED TO EXAMINER |
D - Assigned to Examiner |
DOCK - ASSIGNED TO EXAMINER |
01/26/2006 |
NEW APPLICATION ENTERED IN TRAM |
I - Incoming Correspondence |
NWAP - NEW APPLICATION ENTERED IN TRAM |
01/26/2006 |
SN ASSIGNED FOR SECT 66A SUBSEQ DESIG FROM IB |
M |
SDRC - SN ASSIGNED FOR SECT 66A SUBSEQ DESIG FROM IB |
The "LEITZ" trademark, serial number 85356569 ,
was filed on 27th of June 2011 with a mark drawing code of 4000 and its transaction date is 85356569.
The attorney assigned is William J. Sauers, attorney docket number 107350.14415.
Since 16th of April 2012,
the document can be found in the M40 law office in the publication and issue section.
The date when we last checked the status of this trademark was 04/16/2012.
The corresponded responsible for this trademark is WILLIAM J. SAUERS, located at CROWELL & MORING LLP, PO BOX 14300, WASHINGTON, DC 20044-4300.
The state or country where the trademark was organized is by Leica Microsystems Holdings Gmbh. The legal entity type behing it is a Other (Indicates Entity-Statement should appear)., located at Ernst-leitz-str. 17-37, Wetzlar, zip 35578.
U.S. Class | 038 - Prints and Publications |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 009 |
U.S. Class | 044 - Dental, Medical, and Surgical Appliances |
Class Status | 6 - Active |
Status Date | 04/16/2012 |
Primary Code | 010 |
U.S. Class | 106 - Material Treatment |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 037 |
U.S. Class | 101 - Advertising and Business |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 042 |
GS0091 | Optical devices, namely magnifiers of plastic for viewing two-dimensional objects; microscopes, optical light microscopes, stereomicroscopes, laser scanning microscopes, microscopes for electrophysiology, measuring microscopes, photomicroscopes, confocal laser microscopes, ultrasonic microscopes, TIRF microscopes, laser scanning microscopes; macroscopes; digital cameras, analog cameras; microtomes, ultramicrotomes, cryomicrotomes; cryostats; macrotomes, cryomacrotomes; automatic slide scanners; laboratory devices for histology and cytology, namely coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses; multiwell plates for use in chemical analysis and laboratory or medical research use; protective devices and protective chambers, namely, ultra-high vacuum chambers for use against detrimental effect, for example against laser beams, radiation in general and against microbiological influences, namely, protective eye covers, protective clothing especially made for use in laboratories; laboratory apparatus, namely, climatic chambers; operating microscope stands; printers, ink-jet printers; image analysis devices, namely, scanners; electronic image recording, image storing and image representing devices, namely, digital cameras; reading devices and writing devices for codes of multiwell plates, cassettes, slides, sample carriers, namely, bar-code scanners, storing and transporting devices, namely, blank hard drives for computers; coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces; computer operating software for image analysis and image storage devices, namely, digital cameras; software operating for automated microscopes; computer operating software for use in computers that control and monitor the operational processes in and between scientific and medical institutions; computer operating software for use in coordinate measuring devices, toothing measuring devices, measuring heads, and devices for dimensional measurement of workpieces; multi-coordinate measuring machines |
GS0101 | Surgical microscopes |
GS0371 | Maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, microscopes, measuring machines, tissue embedding machines, digital cameras, optical light microscopes, stereomicroscopes, laser scanning microscopes, microscopes for electrophysiology, measuring microscopes, photomicroscopes, confocal laser microscopes, ultrasonic microscopes, TIRF microscopes, laser scanning microscopes, macroscopes, analog cameras, microtomes, ultramicrotomes, cryomicrotomes, cryostats, macrotomes, cryomacrotomes, automatic slide scanners, multiwell plates for use in chemical analysis and laboratory or medical research use, operating microscope stands, printers, ink-jet printers, coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces, software operating for automated microscopes, computer operating software for use in computers that control and monitor the operational processes in and between scientific and medical institutions, multi-coordinate measuring machines; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, optical devices, namely magnifiers of plastic for viewing two-dimensional objects; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, laboratory devices for histology and cytology, namely coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, protective devices and protective chambers, namely, ultra-high vacuum chambers for use against detrimental effect, for example against laser beams, radiation in general and against microbiological influences, namely, protective eye covers, protective clothing especially made for use in laboratories; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, laboratory apparatus, namely, climatic chambers; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, image analysis devices, namely, scanners; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, electronic image recording, image storing and image representing devices, namely, digital cameras; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, reading devices and writing devices for codes of multiwell plates, cassettes, slides, sample carriers, namely, bar-code scanners, storing and transporting devices, namely, blank hard drives for computers; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, computer operating software for image analysis and image storage devices, namely, digital cameras; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, computer operating software for use in coordinate measuring devices, toothing measuring devices, measuring heads, and devices for dimensional measurement of workpieces |
GS0421 | Creation of computer programs for the data processing of scientific, optical and electronic apparatuses and devices; creation of software for use in coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces, and multi-coordinate measuring machines; creation of computer programs for use in providing data processing for microtomes, ultramicrotomes, cryomicrotomes, cryostats, macrotomes, cryomacrotomes, telepathology devices, automatic slide scanners, laboratory devices for histology and cytology, namely, coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses, contrasting machines, glass knife breakers, high-pressure freezing devices for microscopic sample preparation, and sample carriers for microscopic preparations; scientific consultation, namely, technical advice for scientific and medical institutions with respect to the application of scientific, optical and electronic apparatuses and devices, not to include medical consultations; scientific and technological services and research works, scientific research |
Foreign Filing Date | 01/25/2011 |
Foreign Registration Date | 03/09/2011 |
Foreign Expiration Date | 01/31/2011 |
Foreign Application Number | 302011000712 |
Country | DE |
Foreign Registration Number | 302011000712 |
Foreign Filing Date | 01/25/2011 |
Foreign Registration Date | 03/09/2011 |
Foreign Expiration Date | 01/31/2021 |
Foreign Application Number | 302011000712 |
Country | DE |
Foreign Registration Number | 302011000712 |
Foreign Filing Date | 01/25/2011 |
Foreign Registration Date | 03/09/2011 |
Foreign Expiration Date | 01/31/2021 |
Foreign Application Number | 302011000712 |
Country | DE |
Foreign Registration Number | 302011000712 |
Date | Description | Type | Code |
04/16/2012 |
TEAS/EMAIL CORRESPONDENCE ENTERED |
I - Incoming Correspondence |
TEME - TEAS/EMAIL CORRESPONDENCE ENTERED |
04/16/2012 |
CORRESPONDENCE RECEIVED IN LAW OFFICE |
I - Incoming Correspondence |
CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE |
04/16/2012 |
TEAS RESPONSE TO OFFICE ACTION RECEIVED |
I - Incoming Correspondence |
TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED |
10/18/2011 |
NON-FINAL ACTION MAILED |
F - First Action |
CNRT - NON-FINAL ACTION MAILED |
10/17/2011 |
NON-FINAL ACTION WRITTEN |
R - Renewal |
CNRT - NON-FINAL ACTION WRITTEN |
10/12/2011 |
ASSIGNED TO EXAMINER |
D - Assigned to Examiner |
DOCK - ASSIGNED TO EXAMINER |
07/01/2011 |
NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM |
I - Incoming Correspondence |
NWOS |
06/30/2011 |
NEW APPLICATION ENTERED IN TRAM |
I - Incoming Correspondence |
NWAP - NEW APPLICATION ENTERED IN TRAM |
The "LEITZ" trademark, serial number 85356588 ,
was filed on 27th of June 2011 with a mark drawing code of 3000 and its transaction date is 85356588.
The attorney assigned is William J. Sauers, attorney docket number 107350.14416.
Since 16th of April 2012,
the document can be found in the M40 law office in the publication and issue section.
The status of the trademark was checked last on 04/16/2012.
The corresponded responsible for this trademark is WILLIAM J. SAUERS, located at CROWELL & MORING LLP, PO BOX 14300, WASHINGTON, DC 20044-4300.
The state or country where the trademark was organized is by Leica Microsystems Holdings Gmbh. The legal entity type behing it is a Other (Indicates Entity-Statement should appear)., located at Ernst-leitz-str. 17-37, Wetzlar, zip 35578.
U.S. Class | 038 - Prints and Publications |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 009 |
U.S. Class | 044 - Dental, Medical, and Surgical Appliances |
Class Status | 6 - Active |
Status Date | 04/16/2012 |
Primary Code | 010 |
U.S. Class | 106 - Material Treatment |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 037 |
U.S. Class | 101 - Advertising and Business |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 042 |
CC0000 | The color(s) red and white is/are claimed as a feature of the mark. |
DM0000 | The mark consists of a red circle with the lettering "LEITZ" in white inside. |
GS0091 | Optical devices, namely magnifiers of plastic for viewing two-dimensional objects; microscopes, optical light microscopes, stereomicroscopes, laser scanning microscopes, microscopes for electrophysiology, measuring microscopes, photomicroscopes, confocal laser microscopes, ultrasonic microscopes, TIRF microscopes, laser scanning microscopes; macroscopes; digital cameras, analog cameras; microtomes, ultramicrotomes, cryomicrotomes; cryostats; macrotomes, cryomacrotomes; automatic slide scanners; laboratory devices for histology and cytology, namely coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses; multiwell plates for use in chemical analysis and laboratory or medical research use; protective devices and protective chambers, namely, ultra-high vacuum chambers for use against detrimental effect, for example against laser beams, radiation in general and against microbiological influences, namely, protective eye covers, protective clothing especially made for use in laboratories; laboratory apparatus, namely, climatic chambers; operating microscope stands; printers, ink-jet printers; image analysis devices, namely, scanners; electronic image recording, image storing and image representing devices, namely, digital cameras; reading devices and writing devices for codes of multiwell plates, cassettes, slides, sample carriers, namely, bar-code scanners, storing and transporting devices, namely, blank hard drives for computers; coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces; computer operating software for image analysis and image storage devices, namely, digital cameras; software operating for automated microscopes; computer operating software for use in computers that control and monitor the operational processes in and between scientific and medical institutions; computer operating software for use in coordinate measuring devices, toothing measuring devices, measuring heads, and devices for dimensional measurement of workpieces; multi-coordinate measuring machines |
GS0101 | Surgical microscopes |
GS0371 | Maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, microscopes, measuring machines, tissue embedding machines, digital cameras, optical light microscopes, stereomicroscopes, laser scanning microscopes, microscopes for electrophysiology, measuring microscopes, photomicroscopes, confocal laser microscopes, ultrasonic microscopes, TIRF microscopes, laser scanning microscopes, macroscopes, analog cameras, microtomes, ultramicrotomes, cryomicrotomes, cryostats, macrotomes, cryomacrotomes, automatic slide scanners, multiwell plates for use in chemical analysis and laboratory or medical research use, operating microscope stands, printers, ink-jet printers, coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces, software operating for automated microscopes, computer operating software for use in computers that control and monitor the operational processes in and between scientific and medical institutions, multi-coordinate measuring machines; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, optical devices, namely magnifiers of plastic for viewing two-dimensional objects; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, laboratory devices for histology and cytology, namely coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, protective devices and protective chambers, namely, ultra-high vacuum chambers for use against detrimental effect, for example against laser beams, radiation in general and against microbiological influences, namely, protective eye covers, protective clothing especially made for use in laboratories; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, laboratory apparatus, namely, climatic chambers; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, image analysis devices, namely, scanners; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, electronic image recording, image storing and image representing devices, namely, digital cameras; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, reading devices and writing devices for codes of multiwell plates, cassettes, slides, sample carriers, namely, bar-code scanners, storing and transporting devices, namely, blank hard drives for computers; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, computer operating software for image analysis and image storage devices, namely, digital cameras; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, computer operating software for use in coordinate measuring devices, toothing measuring devices, measuring heads, and devices for dimensional measurement of workpieces |
GS0421 | Creation of computer programs for the data processing of scientific, optical and electronic apparatuses and devices; creation of software for use in coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces, and multi-coordinate measuring machines; creation of computer programs for use in providing data processing for microtomes, ultramicrotomes, cryomicrotomes, cryostats, macrotomes, cryomacrotomes, telepathology devices, automatic slide scanners, laboratory devices for histology and cytology, namely, coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses, contrasting machines, glass knife breakers, high-pressure freezing devices for microscopic sample preparation, and sample carriers for microscopic preparations; scientific consultation, namely, technical advice for scientific and medical institutions with respect to the application of scientific, optical and electronic apparatuses and devices, not to include medical consultations; scientific and technological services and research works, scientific research |
Foreign Filing Date | 02/05/2011 |
Foreign Registration Date | 03/21/2011 |
Foreign Application Number | 302011006635 |
Country | DE |
Foreign Registration Number | 302011006635 |
Foreign Filing Date | 02/05/2011 |
Foreign Registration Date | 03/21/2011 |
Foreign Expiration Date | 02/28/2021 |
Foreign Application Number | 302011006635 |
Country | DE |
Foreign Registration Number | 302011006635 |
DESIGN CODES:
- 26.01.21 - Circles that are totally or partially shaded.
Date | Description | Type | Code |
04/16/2012 |
TEAS/EMAIL CORRESPONDENCE ENTERED |
I - Incoming Correspondence |
TEME - TEAS/EMAIL CORRESPONDENCE ENTERED |
04/16/2012 |
CORRESPONDENCE RECEIVED IN LAW OFFICE |
I - Incoming Correspondence |
CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE |
04/16/2012 |
TEAS RESPONSE TO OFFICE ACTION RECEIVED |
I - Incoming Correspondence |
TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED |
10/18/2011 |
NON-FINAL ACTION MAILED |
F - First Action |
CNRT - NON-FINAL ACTION MAILED |
10/17/2011 |
NON-FINAL ACTION WRITTEN |
R - Renewal |
CNRT - NON-FINAL ACTION WRITTEN |
10/12/2011 |
ASSIGNED TO EXAMINER |
D - Assigned to Examiner |
DOCK - ASSIGNED TO EXAMINER |
07/02/2011 |
NOTICE OF DESIGN SEARCH CODE MAILED |
O - Outgoing Correspondence |
MDSC |
07/01/2011 |
NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM |
I - Incoming Correspondence |
NWOS |
06/30/2011 |
NEW APPLICATION ENTERED IN TRAM |
I - Incoming Correspondence |
NWAP - NEW APPLICATION ENTERED IN TRAM |
The "LEITZ" trademark, serial number 85356622 ,
was filed on 27th of June 2011 with a mark drawing code of 5000 and its transaction date is 85356622.
The attorney assigned is William J. Sauers, attorney docket number 107350.14417.
Since 16th of April 2012,
the document can be found in the M40 law office in the publication and issue section.
The status of this trademark was checked last on 04/16/2012.
The corresponded responsible for this trademark is WILLIAM J. SAUERS, located at CROWELL & MORING LLP, PO BOX 14300, WASHINGTON, DC 20044-4300.
The state or country where the trademark was organized is by Leica Microsystems Holdings Gmbh. The legal entity type behing it is a Other (Indicates Entity-Statement should appear)., located at Ernst-leitz-str. 17-37, Wetzlar, zip 35578.
U.S. Class | 038 - Prints and Publications |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 009 |
U.S. Class | 044 - Dental, Medical, and Surgical Appliances |
Class Status | 6 - Active |
Status Date | 04/16/2012 |
Primary Code | 010 |
U.S. Class | 106 - Material Treatment |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 037 |
U.S. Class | 101 - Advertising and Business |
Class Status | 6 - Active |
Status Date | 07/01/2011 |
Primary Code | 042 |
CC0000 | Color is not claimed as a feature of the mark. |
DM0000 | The mark consists of the lettering LEITZ in a stylized format. |
GS0091 | Optical devices, namely magnifiers of plastic for viewing two-dimensional objects; microscopes, optical light microscopes, stereomicroscopes, laser scanning microscopes, microscopes for electrophysiology, measuring microscopes, photomicroscopes, confocal laser microscopes, ultrasonic microscopes, TIRF microscopes, laser scanning microscopes; macroscopes; digital cameras, analog cameras; microtomes, ultramicrotomes, cryomicrotomes; cryostats; macrotomes, cryomacrotomes; automatic slide scanners; laboratory devices for histology and cytology, namely coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses; multiwell plates for use in chemical analysis and laboratory or medical research use; protective devices and protective chambers, namely, ultra-high vacuum chambers for use against detrimental effect, for example against laser beams, radiation in general and against microbiological influences, namely, protective eye covers, protective clothing especially made for use in laboratories; laboratory apparatus, namely, climatic chambers; operating microscope stands; printers, ink-jet printers; image analysis devices, namely, scanners; electronic image recording, image storing and image representing devices, namely, digital cameras; reading devices and writing devices for codes of multiwell plates, cassettes, slides, sample carriers, namely, bar-code scanners, storing and transporting devices, namely, blank hard drives for computers; coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces; computer operating software for image analysis and image storage devices, namely, digital cameras; software operating for automated microscopes; computer operating software for use in computers that control and monitor the operational processes in and between scientific and medical institutions; computer operating software for use in coordinate measuring devices, toothing measuring devices, measuring heads, and devices for dimensional measurement of workpieces; multi-coordinate measuring machines |
GS0101 | Surgical microscopes |
GS0371 | Maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, microscopes, measuring machines, tissue embedding machines, digital cameras, optical light microscopes, stereomicroscopes, laser scanning microscopes, microscopes for electrophysiology, measuring microscopes, photomicroscopes, confocal laser microscopes, ultrasonic microscopes, TIRF microscopes, laser scanning microscopes, macroscopes, analog cameras, microtomes, ultramicrotomes, cryomicrotomes, cryostats, macrotomes, cryomacrotomes, automatic slide scanners, multiwell plates for use in chemical analysis and laboratory or medical research use, operating microscope stands, printers, ink-jet printers, coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces, software operating for automated microscopes, computer operating software for use in computers that control and monitor the operational processes in and between scientific and medical institutions, multi-coordinate measuring machines; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, optical devices, namely magnifiers of plastic for viewing two-dimensional objects; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, laboratory devices for histology and cytology, namely coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, protective devices and protective chambers, namely, ultra-high vacuum chambers for use against detrimental effect, for example against laser beams, radiation in general and against microbiological influences, namely, protective eye covers, protective clothing especially made for use in laboratories; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, laboratory apparatus, namely, climatic chambers; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, image analysis devices, namely, scanners; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, electronic image recording, image storing and image representing devices, namely, digital cameras; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, reading devices and writing devices for codes of multiwell plates, cassettes, slides, sample carriers, namely, bar-code scanners, storing and transporting devices, namely, blank hard drives for computers; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, computer operating software for image analysis and image storage devices, namely, digital cameras; maintenance and repair of scientific, fine mechanical, optical, electronic apparatuses and devices, namely, computer operating software for use in coordinate measuring devices, toothing measuring devices, measuring heads, and devices for dimensional measurement of workpieces |
GS0421 | Creation of computer programs for the data processing of scientific, optical and electronic apparatuses and devices; creation of software for use in coordinate measuring devices, toothing measuring devices, measuring heads, devices for dimensional measurement of workpieces, and multi-coordinate measuring machines; creation of computer programs for use in providing data processing for microtomes, ultramicrotomes, cryomicrotomes, cryostats, macrotomes, cryomacrotomes, telepathology devices, automatic slide scanners, laboratory devices for histology and cytology, namely, coverslipping machines for slides, tissue infiltration devices, tissue embedding machines, staining machines, staining machines with immunological responses, contrasting machines, glass knife breakers, high-pressure freezing devices for microscopic sample preparation, and sample carriers for microscopic preparations; scientific consultation, namely, technical advice for scientific and medical institutions with respect to the application of scientific, optical and electronic apparatuses and devices, not to include medical consultations; scientific and technological services and research works, scientific research |
Foreign Filing Date | 02/17/2011 |
Foreign Registration Date | 04/15/2011 |
Foreign Expiration Date | 02/28/2021 |
Foreign Application Number | 302011009820 |
Country | DE |
Foreign Registration Number | 302011009820 |
Foreign Filing Date | 02/17/2011 |
Foreign Registration Date | 04/15/2011 |
Foreign Expiration Date | 02/28/2021 |
Foreign Application Number | 302011009820 |
Country | DE |
Foreign Registration Number | 302011009820 |
Date | Description | Type | Code |
04/16/2012 |
TEAS/EMAIL CORRESPONDENCE ENTERED |
I - Incoming Correspondence |
TEME - TEAS/EMAIL CORRESPONDENCE ENTERED |
04/16/2012 |
CORRESPONDENCE RECEIVED IN LAW OFFICE |
I - Incoming Correspondence |
CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE |
04/16/2012 |
TEAS RESPONSE TO OFFICE ACTION RECEIVED |
I - Incoming Correspondence |
TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED |
10/18/2011 |
NON-FINAL ACTION MAILED |
F - First Action |
CNRT - NON-FINAL ACTION MAILED |
10/17/2011 |
NON-FINAL ACTION WRITTEN |
R - Renewal |
CNRT - NON-FINAL ACTION WRITTEN |
10/12/2011 |
ASSIGNED TO EXAMINER |
D - Assigned to Examiner |
DOCK - ASSIGNED TO EXAMINER |
07/01/2011 |
NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM |
I - Incoming Correspondence |
NWOS |
06/30/2011 |
NEW APPLICATION ENTERED IN TRAM |
I - Incoming Correspondence |
NWAP - NEW APPLICATION ENTERED IN TRAM |
Information gathered on 12/31/2009. No claim is made regarding the current trademark status. This page is not to be used as legal documentation. Always consult a licensed attorney.
Based on public records. Inadvertent errors are possible.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the trademark's owners.