ROBOTEK
Trademark domain | |
name | is free? |
---|---|
robotek.com |
The "ROBOTEK" trademark, serial number 74341467 , was filed on 21st of December 1992 with a mark drawing code of 1000 and its transaction date is 74341467. The attorney assigned is Mark H. Tidman, attorney docket number 9800/T-16708. Since 31st of December 2009, the document can be found in the L20 law office in the publication and issue section. The employee responsible is WILLIAMS, IRENE D and the date it was published for opposition on 03/08/1994. The status of the trademark was checked last on 12/01/1995.
The corresponded responsible for this trademark is Mark H. Tidman, located at Jacobson, Price, Holman & Stern, The Jenifer Building, 400 Seventh Street, N.W..The state or country where the trademark was organized is MD by Robotek, Inc.. The legal entity type behing it is a Corporation, located at P.o. Box 1277, Rockville, MD zip 20849.
GOODS AND/OR SERVICES | |
International Class - 042 - Scientific and technological services and research and design relating thereto; industrial analysis and research services; design and development of computer hardware and software. | |
---|---|
U.S. Class | 100 - Miscellaneous |
Class Status | 8 - Abandoned |
Primary Code | 042 |
Status Date | 08/04/1999 |
International Class - 007 - Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs. | |
U.S. Class | 023 - Cutlery, Machinery, and Tools, and Parts Thereof |
Class Status | 8 - Abandoned |
Status Date | 08/04/1999 |
Primary Code | 007 |
International Class - 009 - Scientific, nautical, surveying, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus and instruments for conducting, switching, transforming, accumulating, regulating or controlling electricity; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire extinguishing apparatus. | |
U.S. Class | 038 - Prints and Publications |
Class Status | 8 - Abandoned |
Status Date | 08/04/1999 |
Primary Code | 009 |
Goods codes | |
GS0071 | robots for commercial and industrial use |
GS0091 | autonomous robots for laboratory and personal use; computer software for monitoring, diagnosing, controlling and modifying robots and robot selection |
GS0421 | consultation in the field of robotism |
PROSECUTION HISTORY | ||||
Date | Description | Type | Code | |
---|---|---|---|---|
12/01/1995 | ABANDONMENT - NO USE STATEMENT FILED | S | ABN6 - ABANDONMENT - NO USE STATEMENT FILED | |
08/08/1995 | EXTENSION 2 GRANTED | S | EX2G - EXTENSION 2 GRANTED | |
05/30/1995 | EXTENSION 2 FILED | S | EXT2 - EXTENSION 2 FILED | |
11/28/1994 | EXTENSION 1 GRANTED | S | EX1G - EXTENSION 1 GRANTED | |
10/25/1994 | EXTENSION 1 FILED | S | EXT1 - EXTENSION 1 FILED | |
05/31/1994 | NOA MAILED - SOU REQUIRED FROM APPLICANT | O - Outgoing Correspondence | NOAM - NOTICE OF ALLOWANCE-MAILED | |
03/08/1994 | PUBLISHED FOR OPPOSITION | A - Allowance for Publication | PUBO - PUBLISHED FOR OPPOSITION | |
02/04/1994 | NOTICE OF PUBLICATION | O - Outgoing Correspondence | NPUB - NOTICE OF PUBLICATION | |
12/26/1993 | APPROVED FOR PUB - PRINCIPAL REGISTER | P | CNSA - APPROVED FOR PUB - PRINCIPAL REGISTER | |
12/21/1993 | EXAMINER'S AMENDMENT MAILED | F - First Action | CNEA - EXAMINER'S AMENDMENT MAILED | |
12/20/1993 | PREVIOUS ALLOWANCE COUNT WITHDRAWN | Z - Deletion | ZZZX - PREVIOUS ALLOWANCE COUNT WITHDRAWN | |
12/20/1993 | APPROVED FOR PUB - PRINCIPAL REGISTER | P | CNSA - APPROVED FOR PUB - PRINCIPAL REGISTER | |
12/16/1993 | EXAMINER'S AMENDMENT MAILED | F - First Action | CNEA - EXAMINER'S AMENDMENT MAILED | |
12/16/1993 | PREVIOUS ALLOWANCE COUNT WITHDRAWN | Z - Deletion | ZZZX - PREVIOUS ALLOWANCE COUNT WITHDRAWN | |
12/08/1993 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER | |
12/08/1993 | APPROVED FOR PUB - PRINCIPAL REGISTER | P | CNSA - APPROVED FOR PUB - PRINCIPAL REGISTER | |
07/12/1993 | FINAL REFUSAL MAILED | O - Outgoing Correspondence | CNFR - FINAL REFUSAL MAILED | |
07/07/1993 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
03/31/1993 | NON-FINAL ACTION MAILED | F - First Action | CNRT - NON-FINAL ACTION MAILED | |
03/08/1993 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER |
The "ROBOTEK" trademark, serial number 79057082 , was filed on 29th of April 2008 with a mark drawing code of 3000 and its transaction date is 79057082. Since 11th of June 2010, the document can be found in the L50 law office in the publication and issue section. The employee responsible is HABEEB, MYRIAH A and the date it was published for opposition on 07/27/2010. The date when we last checked the status of this trademark was 06/11/2010.
The corresponded responsible for this trademark is ROBOTEK LTD., located at IMES SANAYI SITESI A BLOK 101.SK. NO.2, Y.DUDULLU UMRANIYE, ISTANBUL, 34775 TURKEY.The state or country where the trademark was organized is by Robotek Otomasyon Teknolojileri; Sanayiticaret Limited Sirketi. The legal entity type behing it is a Other (Indicates Entity-Statement should appear)., located at A Blok 101. Sokak No: 2; Yukaridudullu -istanbul, , zip .
GOODS AND/OR SERVICES | |
International Class - 007 - Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs. | |
---|---|
U.S. Class | 035 - Belting, Hose, Machinery Packing, and Nonmetallic Tires |
Class Status | 6 - Active |
Status Date | 09/05/2008 |
Primary Code | 007 |
International Class - 009 - Scientific, nautical, surveying, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus and instruments for conducting, switching, transforming, accumulating, regulating or controlling electricity; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire extinguishing apparatus. | |
U.S. Class | 038 - Prints and Publications |
Class Status | 6 - Active |
Status Date | 09/05/2008 |
Primary Code | 009 |
International Class - 017 - Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal. | |
U.S. Class | 050 - Merchandise Not Otherwise Classified |
Class Status | 6 - Active |
Status Date | 09/05/2008 |
Primary Code | 017 |
Goods codes | |
CC0000 | Color is not claimed as a feature of the mark. |
DM0000 | The mark consists of the stylized design of three bars forming a stylized triangle and encased in a square with rounded corners, to the left of term "ROBOTEK". |
GS0071 | Industrial robots and industrial robotic apparatus not for personal and hobby use, namely, pick and place robot for glass and mirror production line, trimming robot for plastic and fabric, welding robot for stud welding, arc welding, spot welding, tungsten inert gas welding, metal inert gas welding, plasma welding, electric welding, laser welding, ultrasonic welding, and submerged arc welding, spray painting robot, assembly robot, mobile industrial robot for production plants; motion units, namely, linear motion machines for moving objects, conveyor, turntables for production processes in factories and lifts for turning industrial machine parts; structural parts of industrial robotics, namely, rack and pinion, gearbox, ball screw, linear guide, coupling and clutch, bearings for robots and turn tables and gearbox integrated bearings; hydraulic apparatuses, namely, hydraulic conveyors, hydraulic door actuators, hydraulic jacks, hydraulic lift tables, hydraulic presses for metalworking; hydraulic circuit components, namely, hydraulic power generators to generate pressurized hydraulic liquids for hydraulic circuits, hydraulic pumps, namely, hydraulic piston pumps, hydraulic gear pumps, hydraulic rotary vane pumps, hydraulic cylinders being parts of machines, hydraulic motors for machines, hydraulic manifolds being parts of machines, hydraulic circuit fittings being parts of machines, tubes for hydraulic liquids being parts of machines, hydraulic filters for hydraulic circuits being parts of machines, hydraulic accumulators for hydraulic circuits being parts of machines; pneumatic circuit components being parts of industrial robotic machines, namely, filter regulators, air compressors, pneumatic cylinders, pneumatic motors, pneumatic manifolds, pneumatic circuit fittings, tubes for pneumatic circuit, pneumatic filters for pneumatic circuits, pneumatic accumulators for pneumatic circuits; electric motors, namely, electric motors for actuating machines, electric motors for machines with drive electronic, high frequency spindle motors not for land vehicles with high frequency electric converters and power supply units sold therewith; lifting and hoisting apparatus, namely, elevators, moving pavements, elevating work platforms, lifts, cranes, hoists, belt conveyors; Welding machines, namely, electric arc welding machines, electric resistance welding machines, gas welding machines, laser welding machines; Working machines namely, computer numerical control hot wire cutting machine for polystyrene, computer numerical control stent cutting machines, Computer controlled commercial printing machine for ceramic tiles and fabric, computer numerical control oxy-fuel, plasma, laser, and water jet cutting machine, computer numerical control metal tube bending machine, computer numerical control metal tube cutting machine, computer numerical control induction hardening machine, computer numerical control plastic bag cutting machine, computer numerical control punching presses for sheet metal, computer numerical control bending machine for sheet metal, computer numerical control quilting machine, computer controlled power-operated saw for cutting metal and plastic profiles and tubes, computer numerical control milling and drilling machine for plastic, metal, wood, polystyrene, stone and marble; computer numerical control grinding machine for plastic, metal, wood, polystyrene, stone, marble and glass, computer controlled rotating knife being cutting machines for fabric and paper; dosage machines, namely, machines and parts of machines for the processing of adhesives, plastics, plastic mixtures and other viscose compounds, namely, mixing and dispensing machines for dispensing single or multi-component polymer plastics in specified amounts, and parts and accessories therefor, namely, pumps |
GS0091 | Data processing devices, namely, electrical controllers in the nature of CNC controller, motion controller, programmable logic controller (PLC) and other automation related electronics, namely, electronic industrial automation controls for image processing, controlling and interfacing machines, machine tools, industrial robots, process automation, factory automation, building automation, building security and industrial communication field-bus; Computer-aided design and computer-aided manufacturing software for mechanical design, simulation and production, CAD/CAM software for electric or electronic design, simulation and production; Computer software for controlling industrial robotics and industrial automation applications namely, SCADA being supervisory control and data acquisition, image processing, artificial vision, automated manufacturing, industrial networks and building automation; Scientific, measuring and monitoring apparatus and instruments, namely, gas and liquid flowmeter, accelerometer, proximity sensor, temperature sensor, humidity sensor, liquid level sensor, photoelectric sensor, pressure sensor, strain gauge, ultrasonic sensor, conductivity meter, pH meter, load cell sensors; Electrical security system against theft comprised of electronic keypad for the entering of pass codes, voiceprint detector, face recognition camera, fingerprint scanner, retinal scanner, security card reader and security camera; Data processors, namely, computers, vehicle locating and navigation computers; Power supply apparatus, namely, electrical power supplies; Radar, night vision goggles; Power units, namely, photovoltaic cell, solar cell, fuel cell and photovoltaic cell also including solar thermal collector, sold as a unit |
GS0171 | Hoses made of rubber and plastic for pneumatics, hydraulics, industrial chemicals for use in industrial applications |
PM0000 | ROBOTIC TECH; ROBOTIC TEKNOLOJILERI |
TR0010 | The wording "ROBOTEK" has no meaning in a foreign language. |
INTERNATIONAL REGISTRATION | |
International Registration Number | 0972783 |
---|---|
International Registration Date | 04/29/2008 |
International Publication Date | 09/25/2008 |
International Renewal Date | 04/29/2018 |
Auto protection | 03/04/2010 |
International Status Code | 001 - Request for extension of protection established |
International Status Date | 09/04/2008 |
Priority Claimed In | No |
First Refusal In | Yes |
DESIGN SETUP
Miscellaneous designs with overall triangular shape; Triangular shape (miscellaneous overall shape) . Plain single line squares; Squares, plain single line .PROSECUTION HISTORY | ||||
Date | Description | Type | Code | |
---|---|---|---|---|
06/11/2010 | APPROVED FOR PUB - PRINCIPAL REGISTER | O - Outgoing Correspondence | CNSA - APPROVED FOR PUB - PRINCIPAL REGISTER | |
04/22/2010 | EXPARTE APPEAL RECEIVED AT TTAB | T - TTAB Proceeding | EXAF - EXPARTE APPEAL RECEIVED AT TTAB | |
02/22/2010 | NOTIFICATION OF POSSIBLE OPPOSITION - PROCESSED BY IB | P | OPNX - NOTIFICATION OF POSSIBLE OPPOSITION - PROCESSED BY IB | |
02/04/2010 | NOTIFICATION OF POSSIBLE OPPOSITION SENT TO IB | P | OPNS - NOTIFICATION OF POSSIBLE OPPOSITION SENT TO IB | |
02/04/2010 | NOTIFICATION OF POSSIBLE OPPOSITION CREATED, TO BE SENT TO IB | P | OPNR - NOTIFICATION OF POSSIBLE OPPOSITION CREATED, TO BE SENT TO IB | |
10/02/2009 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
09/30/2009 | TEAS RESPONSE TO OFFICE ACTION RECEIVED | I - Incoming Correspondence | TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED | |
04/06/2009 | NON-FINAL ACTION MAILED | O - Outgoing Correspondence | CNRT - NON-FINAL ACTION MAILED | |
04/03/2009 | NON-FINAL ACTION WRITTEN | R - Renewal | CNRT - NON-FINAL ACTION WRITTEN | |
03/06/2009 | TEAS/EMAIL CORRESPONDENCE ENTERED | I - Incoming Correspondence | TEME - TEAS/EMAIL CORRESPONDENCE ENTERED | |
03/06/2009 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
03/05/2009 | ASSIGNED TO LIE | A - Allowance for Publication | ALIE - ASSIGNED TO LIE | |
03/05/2009 | TEAS RESPONSE TO OFFICE ACTION RECEIVED | I - Incoming Correspondence | TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED | |
10/03/2008 | REFUSAL PROCESSED BY IB | P | RFNT - REFUSAL PROCESSED BY IB | |
09/16/2008 | NON-FINAL ACTION MAILED - REFUSAL SENT TO IB | P | RFCS - REFUSAL SENT TO IB | |
06/07/2010 | TEAS/EMAIL CORRESPONDENCE ENTERED | I - Incoming Correspondence | TEME - TEAS/EMAIL CORRESPONDENCE ENTERED | |
06/07/2010 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
06/07/2010 | TEAS RESPONSE TO OFFICE ACTION RECEIVED | I - Incoming Correspondence | TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED | |
05/21/2010 | NOTICE OF UNRESPONSIVE AMENDMENT - MAILED | O - Outgoing Correspondence | NAUD - NOTICE OF UNRESPONSIVE AMENDMENT - MAILED | |
05/20/2010 | REPORT UNRESPONSIVE AMENDMENT - COMPLETED | R - Renewal | NAUD - REPORT UNRESPONSIVE AMENDMENT - COMPLETED | |
05/14/2010 | TEAS/EMAIL CORRESPONDENCE ENTERED | I - Incoming Correspondence | TEME - TEAS/EMAIL CORRESPONDENCE ENTERED | |
05/14/2010 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
05/14/2010 | ASSIGNED TO LIE | A - Allowance for Publication | ALIE - ASSIGNED TO LIE | |
04/22/2010 | TEAS REQUEST FOR RECONSIDERATION RECEIVED | I - Incoming Correspondence | ERFR | |
04/22/2010 | EX PARTE APPEAL-INSTITUTED | T - TTAB Proceeding | EXPI - EX PARTE APPEAL-INSTITUTED | |
04/22/2010 | JURISDICTION RESTORED TO EXAMINING ATTORNEY | T - TTAB Proceeding | JURT | |
10/26/2009 | FINAL REFUSAL MAILED | O - Outgoing Correspondence | CNFR - FINAL REFUSAL MAILED | |
10/26/2009 | FINAL REFUSAL WRITTEN | R - Renewal | CNFR - FINAL REFUSAL WRITTEN | |
10/02/2009 | TEAS/EMAIL CORRESPONDENCE ENTERED | I - Incoming Correspondence | TEME - TEAS/EMAIL CORRESPONDENCE ENTERED | |
09/30/2009 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
10/02/2009 | TEAS/EMAIL CORRESPONDENCE ENTERED | I - Incoming Correspondence | TEME - TEAS/EMAIL CORRESPONDENCE ENTERED | |
09/16/2008 | REFUSAL PROCESSED BY MPU | P | RFRR | |
09/13/2008 | NON-FINAL ACTION (IB REFUSAL) PREPARED FOR REVIEW | E | RFCR - NON-FINAL ACTION (IB REFUSAL) PREPARED FOR REVIEW | |
09/12/2008 | NON-FINAL ACTION WRITTEN | R - Renewal | CNRT - NON-FINAL ACTION WRITTEN | |
09/05/2008 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER | |
09/05/2008 | NEW APPLICATION ENTERED IN TRAM | I - Incoming Correspondence | NWAP - NEW APPLICATION ENTERED IN TRAM | |
09/04/2008 | SN ASSIGNED FOR SECT 66A APPL FROM IB | M | REPR - SN ASSIGNED FOR SECT 66A APPL FROM IB |
Information gathered on 12/31/2009. No claim is made regarding the current trademark status. This page is not to be used as legal documentation. Always consult a licensed attorney.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the trademark's owners.