GETT
Table of contents:
| Trademark domain | |
| name | is free? |
|---|---|
| gett.com |  |
The "GETT" trademark, serial number 78080686 , was filed on 22nd of August 2001 with a mark drawing code of 3000 and its transaction date is 78080686. Since 31st of December 2009, the document can be found in the L20 law office in the publication and issue section. The employee responsible is SUAREZ, MARIA VICTORIA and the date it was published for opposition on 07/02/2002. The status of this trademark was checked last on 03/12/2008.
The corresponded responsible for this trademark is SRJ INCORPORATED, located at 235 Laura Drive, Addison, IL 60101, .The state or country where the trademark was organized is IL by Srj Incorporated. The legal entity type behing it is a Corporation, located at 235 Laura Drive, Addison, IL zip 60101.
| GOODS AND/OR SERVICES | |
| International Class - 007 - Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs. | |
|---|---|
| U.S. Class | 035 - Belting, Hose, Machinery Packing, and Nonmetallic Tires |
| Class Status | 6 - Active |
| Status Date | 08/27/2001 |
| First Use Date | 08/20/2000 |
| First Use in Commerce Date | 08/22/2001 |
| Primary Code | 007 |
| Goods codes | |
| GS0071 | earth moving machine parts, namely bucket teeth |
DESIGN CODES:
- 26.17.13 - Letters or words underlined and/or overlined by one or more strokes or lines; Overlined words or letters; Underlined words or letters
| PROSECUTION HISTORY | ||||
| Date | Description | Type | Code | |
|---|---|---|---|---|
| 10/23/2008 | NOTICE OF DESIGN SEARCH CODE MAILED | O - Outgoing Correspondence | MDSC | |
| 03/12/2008 | REGISTERED - SEC. 8 (6-YR) ACCEPTED | O - Outgoing Correspondence | 8.OK - REGISTERED - SEC. 8 (6-YR) ACCEPTED | |
| 03/07/2008 | ASSIGNED TO PARALEGAL | A - Allowance for Publication | PLGL - ASSIGNED TO PARALEGAL | |
| 03/04/2008 | TEAS SECTION 8 RECEIVED | I - Incoming Correspondence | ES8R - TEAS SECTION 8 RECEIVED | |
| 11/06/2007 | CASE FILE IN TICRS | O - Outgoing Correspondence | CFIT - CASE FILE IN TICRS | |
| 09/24/2002 | REGISTERED-PRINCIPAL REGISTER | A - Allowance for Publication | R.PR - REGISTERED-PRINCIPAL REGISTER | |
| 07/02/2002 | PUBLISHED FOR OPPOSITION | A - Allowance for Publication | PUBO - PUBLISHED FOR OPPOSITION | |
| 06/12/2002 | NOTICE OF PUBLICATION | O - Outgoing Correspondence | NPUB - NOTICE OF PUBLICATION | |
| 03/04/2002 | APPROVED FOR PUB - PRINCIPAL REGISTER | O - Outgoing Correspondence | CNSA - APPROVED FOR PUB - PRINCIPAL REGISTER | |
| 03/04/2002 | USE AMENDMENT ACCEPTED | P | IUAA - USE AMENDMENT ACCEPTED | |
| 02/28/2002 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER | |
| 01/14/2002 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
| 11/27/2001 | NON-FINAL ACTION MAILED | F - First Action | CNRT - NON-FINAL ACTION MAILED | |
| 11/02/2001 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER | |
| 08/24/2001 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
| 10/31/2001 | AMENDMENT TO USE PROCESSING COMPLETE | I - Incoming Correspondence | AUPC - AMENDMENT TO USE PROCESSING COMPLETE | |
| 08/24/2001 | USE AMENDMENT FILED | S | IUAF - USE AMENDMENT FILED | |
| 09/13/2001 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
The "GETT" trademark, serial number 79030880 , was filed on 14th of July 2005 with a mark drawing code of 3000 and its transaction date is 79030880. Since 31st of December 2009, the document can be found in the L60 law office in the publication and issue section. The date when we last checked the status of this trademark was 07/17/2007.
The corresponded responsible for this trademark is SESHIN PATENT & LAW FIRM, located at #207, World Meridian Venture Center II,, 426-5, Gasan-dong, Geumcheon-gu, Seoul 153-781, Republic of Korea.The state or country where the trademark was organized is by Yuchang Construction Machinery Industries Co., Ltd. The legal entity type behing it is a Unknown, located at Yeungdeungpo-gu Seoul, , zip and also by Yuchang Tractor Co., Ltd. - Other (Indicates Entity-Statement should appear)., located at Yeungdeungpo-gu; Seoul, , zip .
| GOODS AND/OR SERVICES | |
| International Class - 007 - Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs. | |
|---|---|
| U.S. Class | 035 - Belting, Hose, Machinery Packing, and Nonmetallic Tires |
| Class Status | 6 - Active |
| Status Date | 12/01/2006 |
| Primary Code | 007 |
| Goods codes | |
| GS0071 | Track link (assembled steel chain for moving construction equipment by sprocket), track shoe (steel plate for assembling with track link), rubber track shoe (a steel plate covering with rubber on the track link of excavator or dozer), upper roller (steel roller for carrying track link in the underframe of construction equipment), lower roller (a part fo excavator and dozer assembled with underframe of the construction machine to maintain balance against weight and rolling of construction machine), idler (steel wheel for maintaining tension of track link with tension spring), sprocket (steel wheel with teeth on the surface for moving track link with travel reduction gear), segment (steel wheel with teeth on the surface for moving track link with travel reduction gear), track guard (steel product for keep the moving lane for track link), tension spring (steel spring for sending pressure to idler for maintaining tension of track link), bucket (an attachment of excavator and loader to remove soil or rock), bucket tooth (a part for bucket excavator and loader to dig the ground), ripper tip (steel product in the dozer for scratching ground), bucket protector (a part assembled within bucket tooth to protect bucket body from abrasion by impacts), cutting edge (a part which is assembled with front blade of dozer to protect the bottom of the blade), end bits (a part which is a steel plate assembled with the front blade of dozer to protect both sides of the blade), dozer wear bar (a part which is a long steel plate assembled with the front blade of dozer to protect middle part of the blade) and dozer wear plate (a part which is a wide steel plate assembled with front blade of dozer to protect body of the blade), tooth adapter (a part to combine tooth with bucket of excavator and loader), side cutter (a part installed on the side of the excavator loader bucket to divide soil), hydraulic breaker (assembled steel machine with hydraulic power for breaking rocks in the excavator), swing reduction gear (assembled steel gears for reducing rotation of drive shaft for excavator's swing movement), travel reduction gear (assembled steel gears for reducing rotation of drive shaft for construction equipment's driving), swing bearing (steel bearing for swing moving of excavator), control link (a part for linking top of bucket with arm of excavator), control rod (a part for linking top of bucket with arm of excavator), filter (filtering some alien substance in air, oil, water and fuel in the construction machine) |
| PM0000 | GET |
| INTERNATIONAL REGISTRATION | |
| International Registration Number | 0903351 |
|---|---|
| International Registration Date | 07/14/2005 |
| International Publication Date | 12/21/2006 |
| International Renewal Date | 07/14/2015 |
| Auto protection | 05/30/2008 |
| International Status Code | 001 - Request for extension of protection established |
| International Status Date | 11/30/2006 |
| Priority Claimed In | Yes |
| Priority Claimed Date | 06/02/2005 |
| First Refusal In | Yes |
DESIGN CODES:
- 26.17.13 - Letters or words underlined and/or overlined by one or more strokes or lines; Overlined words or letters; Underlined words or letters
| PROSECUTION HISTORY | ||||
| Date | Description | Type | Code | |
|---|---|---|---|---|
| 08/08/2008 | FINAL DECISION TRANSACTION PROCESSED BY IB | P | FINT - FINAL DECISION TRANSACTION PROCESSED BY IB | |
| 07/17/2008 | FINAL DISPOSITION NOTICE SENT TO IB | P | FICS - FINAL DISPOSITION NOTICE SENT TO IB | |
| 07/17/2008 | FINAL DISPOSITION NOTICE CREATED, TO BE SENT TO IB | P | FICR - FINAL DISPOSITION NOTICE CREATED, TO BE SENT TO IB | |
| 05/15/2008 | NOTIFICATION OF POSSIBLE OPPOSITION - PROCESSED BY IB | P | OPNX - NOTIFICATION OF POSSIBLE OPPOSITION - PROCESSED BY IB | |
| 05/01/2008 | NOTIFICATION OF POSSIBLE OPPOSITION SENT TO IB | P | OPNS - NOTIFICATION OF POSSIBLE OPPOSITION SENT TO IB | |
| 05/01/2008 | NOTIFICATION OF POSSIBLE OPPOSITION CREATED, TO BE SENT TO IB | P | OPNR - NOTIFICATION OF POSSIBLE OPPOSITION CREATED, TO BE SENT TO IB | |
| 04/03/2008 | CHANGE OF OWNER RECEIVED FROM IB | M | CHLD - CHANGE OF OWNER RECEIVED FROM IB | |
| 07/17/2007 | ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND | O - Outgoing Correspondence | MAB2 - ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND | |
| 07/17/2007 | ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | O - Outgoing Correspondence | ABN2 - ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | |
| 01/05/2007 | REFUSAL PROCESSED BY IB | P | RFNT - REFUSAL PROCESSED BY IB | |
| 12/19/2006 | NON-FINAL ACTION MAILED - REFUSAL SENT TO IB | P | RFCS - REFUSAL SENT TO IB | |
| 12/19/2006 | REFUSAL PROCESSED BY MPU | P | RFRR | |
| 12/14/2006 | NON-FINAL ACTION (IB REFUSAL) PREPARED FOR REVIEW | E | RFCR - NON-FINAL ACTION (IB REFUSAL) PREPARED FOR REVIEW | |
| 12/13/2006 | NON-FINAL ACTION WRITTEN | R - Renewal | CNRT - NON-FINAL ACTION WRITTEN | |
| 12/01/2006 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER | |
| 12/01/2006 | NEW APPLICATION ENTERED IN TRAM | I - Incoming Correspondence | NWAP - NEW APPLICATION ENTERED IN TRAM | |
| 11/30/2006 | SN ASSIGNED FOR SECT 66A APPL FROM IB | M | REPR - SN ASSIGNED FOR SECT 66A APPL FROM IB | |
Information gathered on 12/31/2009. No claim is made regarding the current trademark status. This page is not to be used as legal documentation. Always consult a licensed attorney.
Based on public records. Inadvertent errors are possible.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the trademark's owners.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the trademark's owners.