MAXTECH

Table of contents:

The "MAXTECH" trademark, serial number 75060451 , was filed on 21st of February 1996 with a mark drawing code of 1000 and its transaction date is 75060451. The attorney assigned is John P. Maldjian, attorney docket number CSP059. Since 2nd of February 2012, the document can be found in the L40 law office in the publication and issue section. The employee responsible is FRAIZER, JEFFRE and the date it was published for opposition on 10/15/1996. The status of this trademark was checked last on 10/26/2007.


The "MAXTECH" trademark, serial number 75333150 , was filed on 30th of July 1997 with a mark drawing code of 3S11 and its transaction date is 75333150. The attorney assigned is PAUL A. KELLER, attorney docket number 8386-200021. Since 1st of May 2012, the document can be found in the L40 law office in the publication and issue section. The employee responsible is FIRST, VIVIAN M and the date it was published for opposition on 12/01/1998. The status of the trademark was checked last on 03/23/2012.


The "MAXTECH" trademark, serial number 78056950 , was filed on 5th of April 2001 with a mark drawing code of 1000 and its transaction date is 78056950. The attorney assigned is Paul A. Keller, attorney docket number 8386-200007/. Since 2nd of February 2012, the document can be found in the L40 law office in the publication and issue section. The employee responsible is WATSON, JULIE A and the date it was published for opposition on 06/11/2002. The status of this trademark was checked last on 09/30/2008.


The "MAXTECH" trademark, serial number 85548697 , was filed on 21st of February 2012 with a mark drawing code of 3000 and its transaction date is 85548697. The attorney assigned is Paul A. Keller, attorney docket number 8386-200021/. Since 15th of April 2014, the document can be found in the M70 law office in the publication and issue section. The employee responsible is MARTIN, JENNIFER MCGAR and the date it was published for opposition on 02/18/2014. The status of this trademark was checked last on 04/15/2014.

The corresponded responsible for this trademark is PAUL A. KELLER, located at HARNESS DICKEY & PIERCE P.L.C., 5445 CORPORATE DR STE 200, TROY, MI 48098-2683.

The state or country where the trademark was organized is by Maxtech Consumer Products Limited. The legal entity type behing it is a Limited Partnership, located at 602 Colby Drive, Waterloo, Ontario, zip N2V1A2.

GOODS AND/OR SERVICES
International Class - 007 - Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
U.S. Class035 - Belting, Hose, Machinery Packing, and Nonmetallic Tires
Class Status6 - Active
Status Date02/28/2012
First Use Date11/17/1997
First Use in Commerce Date12/30/1997
Primary Code007
International Class - 008 - Hand tools and implements (hand-operated); cutlery; side arms; razors.
U.S. Class044 - Dental, Medical, and Surgical Appliances
Class Status6 - Active
Status Date02/28/2012
First Use Date11/10/1996
First Use in Commerce Date08/31/1997
Primary Code008
International Class - 020 - Furniture, mirrors, picture frames; goods (not included in other classes) of wood, cork, reed, cane, wicker, horn, bone, ivory, whalebone, shell, amber, mother-of-pearl, meerschaum and substitutes for all these materials, or of plastics.
U.S. Class050 - Merchandise Not Otherwise Classified
Class Status6 - Active
Status Date02/28/2012
Primary Code020
Goods codes
CC0000Color is not claimed as a feature of the mark.
DM0000The mark consists of the word "Maxtech" contained inside a rectangle wherein the letter "X" comprises an extended vertical line.
GS0071Power tool accessories, namely, drill bits, spade bits, auger bits, forstner bits, hole saws, quick connect and magnetic bit holders, screw guides, nut setters, drill and drive sets, router bits, saw blades, wire wheels and abrasive wheels, machine parts for rotary tools, namely, grinding and sharpening wheels, cut-off wheels, polishing and cleaning discs, sanding bands and discs, grinding stones, and carrying cases for any combination of the foregoing accessories; table saw stands, miter saw stands
GS0081Hand tools, namely, sockets, socket adapters, socket drivers, ratchets, extensions, bit sockets, bolt and nut removers, nut setters, wrenches, combination wrenches, ratchet wrenches, hex keys, adjustable wrenches, screwdrivers, multi-tip drivers, all sold individually and in sets; hand-operated saws and blades therefor, mallets, hammers, sledge hammers, vises, clamps, spreaders, squares, wood chisels, rasps; files, pliers, locking pliers, snips, utility knives and blades
GS0201Clamping tables; work benches with and without power bars, lights, drawers, storage and pegboard backs; saw horses, mobile stands, namely, movable work benches; tool and tool accessory chests, boxes, and containers not made of metal; non-metal bins

TRADEMARK DESIGN SPECIFICATION:
26.13.09 - Quadrilaterals made of geometric figures, objects, humans, plants or animals
26.13.21 - Quadrilaterals that are completely or partially shaded

PROSECUTION HISTORY
DateDescriptionTypeCode
04/15/2014 NOA E-MAILED - SOU REQUIRED FROM APPLICANT E NOAM
02/18/2014 OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED E NPUB - NOTICE OF PUBLICATION
02/18/2014 PUBLISHED FOR OPPOSITION A - Allowance for Publication PUBO - PUBLISHED FOR OPPOSITION
01/29/2014 NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED E NONP
01/16/2014 LAW OFFICE PUBLICATION REVIEW COMPLETED O - Outgoing Correspondence PREV - LAW OFFICE PUBLICATION REVIEW COMPLETED
01/16/2014 APPROVED FOR PUB - PRINCIPAL REGISTER P CNSA - APPROVED FOR PUB - PRINCIPAL REGISTER
07/15/2013 NOTIFICATION OF LETTER OF SUSPENSION E-MAILED O - Outgoing Correspondence GNS3
07/15/2013 LETTER OF SUSPENSION E-MAILED S GNSL - LETTER OF SUSPENSION E-MAILED
07/15/2013 SUSPENSION LETTER WRITTEN R - Renewal CNSL - SUSPENSION LETTER WRITTEN
07/08/2013 TEAS/EMAIL CORRESPONDENCE ENTERED I - Incoming Correspondence TEME - TEAS/EMAIL CORRESPONDENCE ENTERED
07/08/2013 CORRESPONDENCE RECEIVED IN LAW OFFICE I - Incoming Correspondence CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE
07/01/2013 TEAS REQUEST FOR RECONSIDERATION RECEIVED I - Incoming Correspondence ERFR
01/04/2013 NOTIFICATION OF FINAL REFUSAL EMAILED O - Outgoing Correspondence GNFN
01/04/2013 FINAL REFUSAL E-MAILED O - Outgoing Correspondence GNFR - FINAL REFUSAL E-MAILED
01/04/2013 FINAL REFUSAL WRITTEN R - Renewal CNFR - FINAL REFUSAL WRITTEN
12/06/2012 TEAS/EMAIL CORRESPONDENCE ENTERED I - Incoming Correspondence TEME - TEAS/EMAIL CORRESPONDENCE ENTERED
12/06/2012 CORRESPONDENCE RECEIVED IN LAW OFFICE I - Incoming Correspondence CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE
12/03/2012 ASSIGNED TO LIE A - Allowance for Publication ALIE - ASSIGNED TO LIE
11/29/2012 TEAS RESPONSE TO OFFICE ACTION RECEIVED I - Incoming Correspondence TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED
05/29/2012 NOTIFICATION OF NON-FINAL ACTION E-MAILED O - Outgoing Correspondence GNRN
05/29/2012 NON-FINAL ACTION E-MAILED F - First Action GNRT - NON-FINAL ACTION E-MAILED
05/29/2012 NON-FINAL ACTION WRITTEN R - Renewal CNRT - NON-FINAL ACTION WRITTEN
05/21/2012 ASSIGNED TO EXAMINER D - Assigned to Examiner DOCK - ASSIGNED TO EXAMINER
02/29/2012 NOTICE OF DESIGN SEARCH CODE MAILED O - Outgoing Correspondence MDSC
02/28/2012 NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM I - Incoming Correspondence NWOS
02/24/2012 NEW APPLICATION ENTERED IN TRAM I - Incoming Correspondence NWAP - NEW APPLICATION ENTERED IN TRAM

The "MAXTECH" trademark, serial number 85614499 , was filed on 2nd of May 2012 with a mark drawing code of 4000 and its transaction date is 85614499. The attorney assigned is Paul A. Keller, attorney docket number 5792-200005/. Since 22nd of April 2014, the document can be found in the M70 law office in the publication and issue section. The employee responsible is MARTIN, JENNIFER MCGAR and the date it was published for opposition on 02/25/2014. The status of this trademark was checked last on 04/22/2014.

The corresponded responsible for this trademark is PAUL A. KELLER, located at HARNESS DICKEY & PIERCE P.L.C., 5445 CORPORATE DR STE 200, TROY, MI 48098-2683.

The state or country where the trademark was organized is by Maxtech Consumer Products Limited. The legal entity type behing it is a Limited Partnership, located at 602 Colby Drive, Waterloo Ontario, zip N2V1A2.

GOODS AND/OR SERVICES
International Class - 007 - Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
U.S. Class035 - Belting, Hose, Machinery Packing, and Nonmetallic Tires
Class Status6 - Active
Status Date05/08/2012
First Use Date11/17/1997
First Use in Commerce Date12/30/1997
Primary Code007
International Class - 008 - Hand tools and implements (hand-operated); cutlery; side arms; razors.
U.S. Class044 - Dental, Medical, and Surgical Appliances
Class Status6 - Active
Status Date05/08/2012
First Use Date11/10/1996
First Use in Commerce Date08/31/1997
Primary Code008
International Class - 020 - Furniture, mirrors, picture frames; goods (not included in other classes) of wood, cork, reed, cane, wicker, horn, bone, ivory, whalebone, shell, amber, mother-of-pearl, meerschaum and substitutes for all these materials, or of plastics.
U.S. Class050 - Merchandise Not Otherwise Classified
Class Status6 - Active
Status Date05/08/2012
Primary Code020
Goods codes
GS0071power tool accessories, namely, drill bits, spade bits, auger bits, forstner bits, hole saws, quick connect and magnetic bit holders, screw guides, nut setters, drill and drive sets, router bits, saw blades, wire wheels and abrasive wheels, machine parts for rotary tools, namely, grinding and sharpening wheels, cut-off wheels, polishing and cleaning discs, sanding bands and discs, grinding stones, and carrying cases for any combination of the foregoing accessories; table saw stands, miter saw stands
GS0081hand tools, namely, sockets, socket adapters, socket drivers, ratchets, extensions, bit sockets, bolt and nut removers, nut setters, wrenches, combination wrenches, ratchet wrenches, hex keys, adjustable wrenches, screwdrivers, multi-tip drivers, all sold individually and in sets; hand-operated saws and blades therefore, mallets, hammers, sledge hammers, vises, clamps, spreaders, squares, wood chisels, rasps; files, pliers, locking pliers, snips, utility knives and blades
GS0201clamping tables; work benches with and without power bars, lights, drawers, storage and pegboard backs; saw horses, mobile stands, namely, movable work benches; tool and tool accessory chests, boxes, and containers not made of metal; non-metal bins
PM0000MAX TECHNOLOGY
PROSECUTION HISTORY
DateDescriptionTypeCode
04/22/2014 NOA E-MAILED - SOU REQUIRED FROM APPLICANT E NOAM
02/25/2014 OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED E NPUB - NOTICE OF PUBLICATION
02/25/2014 PUBLISHED FOR OPPOSITION A - Allowance for Publication PUBO - PUBLISHED FOR OPPOSITION
02/05/2014 NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED E NONP
01/18/2014 LAW OFFICE PUBLICATION REVIEW COMPLETED O - Outgoing Correspondence PREV - LAW OFFICE PUBLICATION REVIEW COMPLETED
01/16/2014 APPROVED FOR PUB - PRINCIPAL REGISTER P CNSA - APPROVED FOR PUB - PRINCIPAL REGISTER
07/15/2013 NOTIFICATION OF LETTER OF SUSPENSION E-MAILED O - Outgoing Correspondence GNS3
07/15/2013 LETTER OF SUSPENSION E-MAILED S GNSL - LETTER OF SUSPENSION E-MAILED
07/15/2013 SUSPENSION LETTER WRITTEN R - Renewal CNSL - SUSPENSION LETTER WRITTEN
07/05/2013 TEAS/EMAIL CORRESPONDENCE ENTERED I - Incoming Correspondence TEME - TEAS/EMAIL CORRESPONDENCE ENTERED
07/05/2013 CORRESPONDENCE RECEIVED IN LAW OFFICE I - Incoming Correspondence CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE
07/01/2013 TEAS REQUEST FOR RECONSIDERATION RECEIVED I - Incoming Correspondence ERFR
01/04/2013 NOTIFICATION OF FINAL REFUSAL EMAILED O - Outgoing Correspondence GNFN
01/04/2013 FINAL REFUSAL E-MAILED O - Outgoing Correspondence GNFR - FINAL REFUSAL E-MAILED
01/04/2013 FINAL REFUSAL WRITTEN R - Renewal CNFR - FINAL REFUSAL WRITTEN
12/12/2012 TEAS/EMAIL CORRESPONDENCE ENTERED I - Incoming Correspondence TEME - TEAS/EMAIL CORRESPONDENCE ENTERED
12/12/2012 CORRESPONDENCE RECEIVED IN LAW OFFICE I - Incoming Correspondence CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE
12/04/2012 ASSIGNED TO LIE A - Allowance for Publication ALIE - ASSIGNED TO LIE
11/29/2012 TEAS RESPONSE TO OFFICE ACTION RECEIVED I - Incoming Correspondence TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED
05/29/2012 NOTIFICATION OF NON-FINAL ACTION E-MAILED O - Outgoing Correspondence GNRN
05/29/2012 NON-FINAL ACTION E-MAILED F - First Action GNRT - NON-FINAL ACTION E-MAILED
05/29/2012 NON-FINAL ACTION WRITTEN R - Renewal CNRT - NON-FINAL ACTION WRITTEN
05/21/2012 ASSIGNED TO EXAMINER D - Assigned to Examiner DOCK - ASSIGNED TO EXAMINER
05/09/2012 NOTICE OF PSEUDO MARK MAILED O - Outgoing Correspondence MPMK
05/08/2012 NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM I - Incoming Correspondence NWOS
05/05/2012 NEW APPLICATION ENTERED IN TRAM I - Incoming Correspondence NWAP - NEW APPLICATION ENTERED IN TRAM


Information gathered on 12/31/2009. No claim is made regarding the current trademark status. This page is not to be used as legal documentation. Always consult a licensed attorney.

Based on public records. Inadvertent errors are possible.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the trademark's owners.