TECHNETICS
- Document 73791402 overview
- Document 73813983 overview
- Document 74681922 overview
- Document 85381668 overview
- Document 85381675 overview
The "TECHNETICS" trademark, serial number 73791402 , was filed on 6th of April 1989 with a mark drawing code of 3S09 and its transaction date is 73791402. The attorney assigned is Julia Spoor Gard, attorney docket number 5830-18151. Since 2nd of February 2012, the document can be found in the 560 law office in the publication and issue section. The employee responsible is BISHOP, JOAN L and the date it was published for opposition on 10/31/1989. The status of the trademark was checked last on 04/22/2009.
The "TECHNETICS" trademark, serial number 73813983 , was filed on 21st of July 1989 with a mark drawing code of 3S11 and its transaction date is 73813983. The attorney assigned is JULIA SPOOR GARD, attorney docket number 5830-18849. Since 2nd of February 2012, the document can be found in the 530 law office in the publication and issue section. The employee responsible is TINGLEY, JOHN C and the date it was published for opposition on 03/20/1990. The status of the trademark was checked last on 07/10/2009.
The "TECHNETICS" trademark, serial number 74681922 , was filed on 30th of May 1995 with a mark drawing code of 3T09 and its transaction date is 74681922. Since 2nd of February 2012, the document can be found in the L60 law office in the publication and issue section. The employee responsible is THOMPSON, LAVERNE and the date it was published for opposition on 01/30/1996. The status of the trademark was checked last on 07/19/2006.
The "TECHNETICS" trademark, serial number 85381668 , was filed on 26th of July 2011 with a mark drawing code of 4000 and its transaction date is 85381668. Since 27th of March 2012, the document can be found in the M50 law office in the publication and issue section. The employee responsible is CHHINA, KARANENDRA S and the date it was published for opposition on 01/31/2012. The status of the trademark was checked last on 03/27/2012.
The corresponded responsible for this trademark is ANDREW ROPPEL, located at HOLLAND & HART LLP, PO BOX 8749, DENVER, CO 80201-8749.The state or country where the trademark was organized is NC by Technetics Group Llc. The legal entity type behing it is a Limited Liability Company, located at 5605 Carnegie Blvd., Charlotte, NC zip 28209.
| GOODS AND/OR SERVICES | |
| International Class - 023 - Yarns and threads, for textile use. | |
|---|---|
| U.S. Class | 043 - Thread and Yarn |
| Class Status | 6 - Active |
| Status Date | 08/01/2011 |
| Primary Code | 023 |
| International Class - 001 - Chemicals used in industry, science and photography, as well as in agriculture, horticulture and forestry; unprocessed artificial resins; unprocessed plastics; manures; fire extinguishing compositions; tempering and soldering preparations; chemical substances for preserving foodstuffs; tanning substances; adhesives used in industry. | |
| U.S. Class | 046 - Foods and Ingredients of Foods |
| Class Status | 6 - Active |
| Status Date | 08/01/2011 |
| Primary Code | 001 |
| International Class - 006 - Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; nonelectric cables and wires of common metal; ironmongery, small items of metal hardware; pipes and tubes of metal; safes; goods of common metal not included in other classes; ores. | |
| U.S. Class | 050 - Merchandise Not Otherwise Classified |
| Class Status | 6 - Active |
| Status Date | 08/01/2011 |
| Primary Code | 006 |
| International Class - 007 - Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs. | |
| U.S. Class | 035 - Belting, Hose, Machinery Packing, and Nonmetallic Tires |
| Class Status | 6 - Active |
| Status Date | 08/01/2011 |
| Primary Code | 007 |
| International Class - 017 - Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal. | |
| U.S. Class | 050 - Merchandise Not Otherwise Classified |
| Class Status | 6 - Active |
| Status Date | 08/01/2011 |
| Primary Code | 017 |
| Goods codes | |
| CC0000 | Color is not claimed as a feature of the mark. |
| GS0011 | chemical preparations for making fluorocarbon polymers bondable to other materials |
| GS0061 | metal brush seals for use in the process industries; metal abradable seals for use in gas turbines; non-ferrous metals and their alloys; metal alloys for further manufacturing; metal fibers sold in sheets that provides sound absorption properties for further manufacturing; metal seals for use in the nuclear, cryogenics, space, chemical, and petrochemical industries; metals seals for nuclear reactor pressure vessel closures; metal seals for use in containers for spent fuel storage and transportation |
| GS0071 | Mechanical seals being machine parts; metal silencers for turbine engines; non-metal seals for use in oil and fuel distribution in engines |
| GS0171 | Non-metal seals and gaskets for use in the aerospace, pharmaceutical, and processing industries; sealing and insulating materials; non-metal sealing rings for use as connection seals; non-metal seals for use in oil and fuel distribution in tube hose and oil pressure sensors; PTFE in the form of rods and cylinders used in further manufacturing in the fields of chemical processing, food processing, semiconductors, and pharmaceutical and medical applications; PTFE gaskets used in the fields of chemical processing, food processing, semiconductors, and pharmaceutical and medical applications; PTFE tapes and films for insulating, sealing, packaging, and a wide range of industrial applications; PTFE yarns and fibers for the manufacture of filters and sealing materials; Modified PTFE membranes for use as diaphragms in pumps and valves; carbon brush seals for sealing fluids in turbines and turbo machinery; PTFE films for industrial or commercial use for packaging articles for transport or storage, and PTFE tapes and PTFE pellets for packaging articles for transport or storage |
| GS0231 | PTFE thread for use in the manufacture of awnings, tents, umbrellas, boat covers, convertible tops and outdoor fabrics |
| PROSECUTION HISTORY | ||||
| Date | Description | Type | Code | |
|---|---|---|---|---|
| 03/27/2012 | NOA E-MAILED - SOU REQUIRED FROM APPLICANT | E | NOAM | |
| 01/31/2012 | OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED | E | NPUB - NOTICE OF PUBLICATION | |
| 01/31/2012 | PUBLISHED FOR OPPOSITION | A - Allowance for Publication | PUBO - PUBLISHED FOR OPPOSITION | |
| 01/11/2012 | NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED | E | NONP | |
| 12/23/2011 | LAW OFFICE PUBLICATION REVIEW COMPLETED | O - Outgoing Correspondence | PREV - LAW OFFICE PUBLICATION REVIEW COMPLETED | |
| 12/22/2011 | ASSIGNED TO LIE | A - Allowance for Publication | ALIE - ASSIGNED TO LIE | |
| 12/03/2011 | APPROVED FOR PUB - PRINCIPAL REGISTER | P | CNSA - APPROVED FOR PUB - PRINCIPAL REGISTER | |
| 12/03/2011 | EXAMINER'S AMENDMENT ENTERED | I - Incoming Correspondence | XAEC - EXAMINER'S AMENDMENT ENTERED | |
| 12/03/2011 | NOTIFICATION OF EXAMINERS AMENDMENT E-MAILED | O - Outgoing Correspondence | GNEN | |
| 12/03/2011 | EXAMINERS AMENDMENT E-MAILED | F - First Action | GNEA - EXAMINERS AMENDMENT E-MAILED | |
| 12/03/2011 | EXAMINERS AMENDMENT -WRITTEN | R - Renewal | CNEA - EXAMINERS AMENDMENT -WRITTEN | |
| 11/15/2011 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER | |
| 08/01/2011 | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM | I - Incoming Correspondence | NWOS | |
| 07/29/2011 | NEW APPLICATION ENTERED IN TRAM | I - Incoming Correspondence | NWAP - NEW APPLICATION ENTERED IN TRAM | |
The "TECHNETICS" trademark, serial number 85381675 , was filed on 26th of July 2011 with a mark drawing code of 4000 and its transaction date is 85381675. Since 23rd of May 2012, the document can be found in the M50 law office in the publication and issue section. The status of this trademark was checked last on 05/23/2012.
The corresponded responsible for this trademark is ANDREW ROPPEL, located at HOLLAND & HART LLP, PO BOX 8749, DENVER, CO 80201-8749.The state or country where the trademark was organized is NC by Technetics Group Llc. The legal entity type behing it is a Limited Liability Company, located at 5605 Carnegie Blvd., Charlotte, NC zip 28209.
| GOODS AND/OR SERVICES | |
| International Class - 040 - Treatment of materials. | |
|---|---|
| U.S. Class | 106 - Material Treatment |
| Class Status | 6 - Active |
| Status Date | 08/01/2011 |
| Primary Code | 040 |
| International Class - 042 - Scientific and technological services and research and design relating thereto; industrial analysis and research services; design and development of computer hardware and software. | |
| U.S. Class | 101 - Advertising and Business |
| Class Status | 6 - Active |
| Status Date | 08/01/2011 |
| Primary Code | 042 |
| Goods codes | |
| GS0401 | manufacture of engineered polymer parts and products to the order and/or specification of others; prototype fabrication of new polymer products to the order and/or specification of others; machine shop services, namely, machining parts for others; parts molding; manufacture of metal, elastomer, and inflatable seals and sealing systems to the order and specification of others; custom manufacture of metal seals, metal bellows, wire cloth filters and strainers, precision burst discs, latching solenoid valves, pressure regulators, relief valves, and check valves, all products for use in fluid control; manufacture of plastic parts, tapes, films, and fibers to the order and/or specification of others; prototype fabrication of new plastic products to the order and/or specification of others; molding services, namely, creating custom molded PTFE shapes and parts through compression molding, isostatic molding, and auto molding; etching of fluoropolymer sheets, tubing, and three-dimensional shapes; manufacture of plastic parts to the order and/or specification of others |
| GS0421 | design and development of engineered metal, elastomer, and inflatable seals and sealing systems; engineering services; design and development of metal seals, metal bellows, wire cloth filters and strainers, precision burst discs, latching solenoid valves, pressure regulators, relief valves, and check valves, all products for use in fluid control |
| PROSECUTION HISTORY | ||||
| Date | Description | Type | Code | |
|---|---|---|---|---|
| 05/23/2012 | TEAS/EMAIL CORRESPONDENCE ENTERED | I - Incoming Correspondence | TEME - TEAS/EMAIL CORRESPONDENCE ENTERED | |
| 05/22/2012 | CORRESPONDENCE RECEIVED IN LAW OFFICE | I - Incoming Correspondence | CRFA - CORRESPONDENCE RECEIVED IN LAW OFFICE | |
| 05/22/2012 | TEAS RESPONSE TO OFFICE ACTION RECEIVED | I - Incoming Correspondence | TROA - TEAS RESPONSE TO OFFICE ACTION RECEIVED | |
| 11/22/2011 | NOTIFICATION OF NON-FINAL ACTION E-MAILED | O - Outgoing Correspondence | GNRN | |
| 11/22/2011 | NON-FINAL ACTION E-MAILED | F - First Action | GNRT - NON-FINAL ACTION E-MAILED | |
| 11/22/2011 | NON-FINAL ACTION WRITTEN | R - Renewal | CNRT - NON-FINAL ACTION WRITTEN | |
| 11/15/2011 | ASSIGNED TO EXAMINER | D - Assigned to Examiner | DOCK - ASSIGNED TO EXAMINER | |
| 08/01/2011 | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM | I - Incoming Correspondence | NWOS | |
| 07/29/2011 | NEW APPLICATION ENTERED IN TRAM | I - Incoming Correspondence | NWAP - NEW APPLICATION ENTERED IN TRAM | |
Information gathered on 12/31/2009. No claim is made regarding the current trademark status. This page is not to be used as legal documentation. Always consult a licensed attorney.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the trademark's owners.